Wiring Examples - Datavideo SE-1000 Instruction Manual

Watch the AUX output signal, and when you see the image you want to store press Adjustment Knob F4.
To assign the stored FMEM image to a crosspoint see Menu 2/3 XPTAS Assigning Crosspoints - Page 25
To leave the menu press the [FUNC] button so that it is no longer illuminated.

Wiring Examples

There are many ways in which you can connect the SE-1000 to your ancillary equipment.
We cannot cover every possible permutation but many of the principles shown in these diagrams can be
used in other set ups.
On page 44 ( Monitoring ) there is an example of how to utilise the six built in Format / Standard converters
for convenient monitoring of all the input channels. The two Datavideo TLM-433 3 x 4" TFT LCD Monitor
Banks can be mounted above the SE-1000, together with the ITC-100, to form an extremely compact and
space efficient set up.
Of course you could choose to use the format standard converters in other ways if you wish.
SE-1000 with two TLM-433 monitor banks and ITC-100 talkback / intercom.
52