Setting The Brightness; Setting Colour Saturation - Datavideo SE-1000 Instruction Manual

Setting the Brightness

In standard definition mode you can adjust the brightness of each of the output channels. To adjust the
brightness it is advisable to monitor the output on a screen.
With the LCD displaying the status for channel 1, press the Adjustment Knob to bring up the Format
Standard Converter Adjustment Menu, and rotate the Adjustment Knob until FN04 is displayed.
Note: FN04 will not appear if the output is set to an HD format.
Press the Adjustment Knob and rotate it to select the required setting, anti-clockwise for a lower value
(darker), clockwise for a higher value (brighter). The default (neutral) value is 50.
Once you have set the required level press the Adjustment Knob. The SAVE option will appear.
Rotate the Adjustment Knob to select YES and then press it to store the settings. Once stored the screen will
display the new value.
To Exit the set up menu rotate the Adjustment Knob anti clockwise until FN13 - EXIT is displayed and then
press the Adjustment Knob.
Note: If no adjustments are made within 20 seconds the LCD will return to the status display
automatically.
Setting the Colour Saturation
In standard definition mode you can adjust the colour saturation of each of the output channels. To adjust the
colour saturation it is advisable to monitor the output on a screen.
With the LCD displaying the status for channel 1, press the Adjustment Knob to bring up the Format
Standard Converter Adjustment Menu, and rotate the Adjustment Knob until FN05 is displayed.
Note: FN05 will not appear if the output is set to an HD format.
Press the Adjustment Knob and rotate it to select the required setting, anti-clockwise for a lower value (less
colour), clockwise for a higher value (more colour). The default (neutral) value is 50.
Once you have set the required level press the Adjustment Knob. The SAVE option will appear.
39