Table of Contents
Advertisement
Deployment
Commissioning > Firmware update
3.2.3 Firmware update
Requirement
Current firmware on
www.vipa.com
Load firmware on USB
stick
Prepare the cloudPanel
Transfer firmware from
USB stick into cloudPanel
30
To execute the firmware update an empty USB stick (at least 1GB) in FAT32 format is
necessary.
The latest firmware versions can be found in the service area at www.vipa.com.
CAUTION!
When installing a new firmware you have to be extremely careful. Under
certain circumstances you can destroy the cloudPanel, for example if the
voltage supply is interrupted during transfer or if the firmware file is defec-
tive. In this case, please call our hotline!
Please regard that the version of the update firmware has to be different
from the existing firmware otherwise no update is executed.
1.
Go to www.vipa.com.
2.
Click on 'Service / Support è Downloads è Firmware'.
3.
Via 'HMI' navigate to your cloudPanel, download the ZIP file for the update process
and unzip the content in the root directory of the USB stick.
1.
Connect the cloudPanel to the power supply.
ð The cloudPanel starts with the VIPA splash screen.
2.
Open the "System Settings" interface of the cloudPanel via the [Settings] button.
3.
Activate 'Autorun scripts from external storage' under 'Services' by moving the
button to the right.
1.
Insert the prepared USB stick into the USB port of the cloudPanel.
ð The update process starts automatically and can take several minutes.
After successful update the message "Process completed successfully"
appears.
A log file "lastupdate.log" is generated and saved in the root directory of the
USB stick.
2.
Remove the USB-Stick and reboot the cloudPanel.
HB160 | TP-cloud | H41-L1A41-0 | en | 18-02
VIPA HMI
Advertisement
Table of Contents
