Back View - Oregon 710-120 Original Instruction Manual

710-120

3.3 Back view

B
Pos Part
A Pitch adjustment wing
Grinding head cover and grinding
B
wheel guard
C Top-plate angle scale
D
Head-tilt angle scale
E
Wire
F
Wire adjustment knobs
G Head-tilt angle knob
593357aa_AutoChainGrinder_710-120_OM.indd 9
C
D
F
E
Description
Adjusts the pitch.
Protects the grinding head and grinding wheel; it also
protects the user from sparks during grinding.
Shows the top-plate angle on a scale from 0-35°. Default:
25°. It is set using the top-plate angle screw (letter K in front
view illustration on page 8).
Shows the head-tilt angle on a scale from 50-90°.
Default: 55°.
Controls the vertical movement of the grinding head.
Adjusts the wire that controls the vertical movement of the
grinding head.
Sets the head-tilt angle on the head-tilt angle scale. (D)
Product Description
A
G
9
3/1/17 12:03 PM