Depth Gauge Grinding - Oregon 710-120 Original Instruction Manual

710-120
5. Set the grinding wheel switch to OFF.
6. Set the chain pusher switch to OFF.
7. Remove the chain.
8. To turn off the power to the machine, press
the emergency stop button.
IMPORTANT Grinding dust can interfere
with the machine's operation. Clean the
machine daily to remove all of the grinding
dust. Use a vacuum cleaner, brush, or similar to
clean the machine.
593357aa_AutoChainGrinder_710-120_OM.indd 25

5.4 Depth gauge grinding

1. Change the grinding wheel to 1/4"
See section 4.5, "Installing the grinding
wheel."
2. Shape the edges of the grinding wheel to
make sure that the shape is correct. See
section 5.2.1, "Preparing the grinding
wheel."
3. Set the head tilt angle to 90° (see 5.2.2,
"Setting the head-tilt angle").
4. Set the top plate angle to 0° (see 5.2.3,
"Setting the top-plate angle").
Operation
25
3/1/17 12:03 PM