Maintenance And Service; Safety During Maintenance; Frequency Of Maintenance - Oregon 710-120 Original Instruction Manual

710-120

6 Maintenance and Service

6.1 Safety during maintenance

WARNING Make sure that the power is turned off before you install, operate, or perform maintenance
on the machine.
WARNING Before you install, operate, or perform maintenance on the machine, you must read the
safety information in this manual. Obey the instructions in this manual to prevent injuries or damage to the
equipment.
WARNING Always wear safety gloves, protective glasses, and any other personal protective
equipment suitable for your task.
WARNING The user must only perform maintenance that is described in this manual. Only approved
and trained service technicians can service the machine.

6.2 Frequency of maintenance

Maintenance Step
Cleaning
Change grinding wheels
Center the grinding wheel
Check and adjust the wire
Fasten the chain vise
593357aa_AutoChainGrinder_710-120_OM.indd 27
When
Daily
If worn or damaged
When worn or if the chain has a
different width than the previous
Once every 3 months, depending
on usage
If the chain is loose during
operation
Maintenance and Service
Description
Clean the machine daily to remove
grinding dust. Use a vacuum cleaner or
brush to clean the machine.
See section 6.3, "Changing the grinding
wheel and fitting the grinding wheel
guard"
See step 14 of section 5.2.5, "Making the
grinding settings"
See section 6.5, "Checking and adjusting
the wire"
See section 6.4, "Fastening the chain vise"
27
3/1/17 12:03 PM