Table of Contents
Advertisement
Installation
3.
Once the grinding wheel has been verified,
you're ready to begin the install.
4.
Start by removing the grinding wheel shield
(C) to access the wheel attachment nut (B).
Use the provided Allen wrench to loosen
the retaining screw (D).
A
5.
Remove the wheel attachment nut from
the hub.
16
593357aa_AutoChainGrinder_710-120_OM.indd 16
6.
Next, insert the appropriate wheel onto the
hub and, using moderate pressure with
your hands, secure the wheel attachment
nut to hold the wheel in place.
WARNING Over-tightening the wheel
can cause it to break.
7.
Finally, reposition the shield and secure it in
D
place with the retaining screw.
WARNING Never start the grinder
without the wheel guards in place.
8.
Before using the grinder, you'll need to
check to ensure the wheel is properly
installed.
C
9.
With the power off, gently spin the grinding
wheel and check for wheel wobble.
10.
Conduct a final check for proper assembly
by turning on the main power and
switching on the wheel power switch
B
while standing to the side. Look for
vibrations due to wheel oscillation or other
interference.
WARNING Always keep bystanders
at a safe distance from a grinder while in
operation.
CAUTION The grind wheel is designed
to rotate away from the operator. This
safety feature reduces the likelihood of
sharp pieces of shrapnel striking the
operator should the wheel fracture or break
during the grinding process. Therefore,
do not stand behind the grinder when it is
operating.
Note: To get the best performance from
your grinder, ensure the grinding wheel
is centered over the vise. See step 14
of section 5.2.5, "Making the grinding
settings," or the provided video for specific
instructions.
710-120
3/1/17 12:03 PM
Advertisement
Table of Contents
