Controls - Oregon 710-120 Original Instruction Manual

710-120

3.5 Controls

Pos Part
A Chain pusher switch
B
Grinding speed knob
C
Emergency stop button
D Grinding wheel motor switch
E Grinding head positioning button
F Power button
593357aa_AutoChainGrinder_710-120_OM.indd 11
A
B
C
Description
ON: starts the chain feed, so that the chain moves in a
forward direction. OFF: stops the chain feed.
Sets the grinding speed.
Low speed: Grinds the chain at low speed in a pulsing motion
to avoid that the chain gets burned.
High speed: grinds the chain at a high speed without the
pulsing motion.
Shuts off the power and stops the machine. The emergency
stop button is used to turn off the machine after operation
and to do an emergency shut-down.
Starts the grinding motor.
Changes the angle of the grinding head from left to right or
vice versa.
Turns on the machine.
Product Description
D
E
F
3/1/17 12:03 PM
11