Advantech ITA-5831 Series User Manual page 4

Initial Inspection
Before setting up the equipment, check that the items listed below are included and
in good condition.
 1 x ITA-5831 series industrial computer
 1 x ITA-5831 accessory box
 1 x Warranty card
If any of the above items are missing or damaged, contact your distributor or sales
representative immediately. We have carefully inspected the product mechanically
and electrically before shipment. It should be free of marks and scratches and in per-
fect working order upon receipt. As you unpack the product, check it for signs of ship-
ping damage (for example, damaged box, scratches, dents, etc.). If the product is
damaged or fails to meet the specifications, notify our service department or your
local sales representative immediately. Also, please notify the carrier. Retain the
shipping carton and packing material for inspection by the carrier. After inspection,
we will make arrangements to repair or replace the unit.
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following occurs, have the equipment checked by qualified service
personnel:
The power cord or plug is damaged.
Liquid has penetrated the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning or does not operate according to the user
manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
ITA-5831 User Manual iv