X85; Input Data - Konica Minolta CM-23d Instruction Manual

… Input Data

„
Create the color values for the color space selected in "Input Colorimetric Target"-"Color space".
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Input Data",
and then press the [Confirmation] key.
The Input data list screen is displayed.
2
Use [▲] or [▼] to move the cursor to the item to set,
and then press the [Confirmation] key.
The <Input data> screen is displayed.
3
Use [▲] or [▼] to move the cursor to the item to set,
and press the [Confirmation] key to change the
setting.
• Press [◀] or [▶] to move the cursor to the setting value
area. Pressing the [Confirmation] key causes the
cursor to appear on the value. Press [▲] or [▼] to
change the value. Move the cursor between the digits of
the value by pressing [◀] or [▶].
Settings
{ X·Y·Z: 0.01 ~ +300.000
{ L: 0.00 ~ +300.000
a·b: -300.00 ~ +300.00
• Press the [Confirmation] key to confirm every time the
setting of an item is changed.
4
After all settings have been configured, use [▲] or
[▼] to move the cursor to "OK", and then press the
[Confirmation] key.
The setting is confirmed and the screen returns to the
<Input Colorimetric Target> screen.
If you press the [ESC] key during setting, the setting value
of the open screen is return to the value before the change.
5
Press [ESC] to return to the <Input Colorimetric
Target> screen.
Notes •
If the selected target data number is already linked to
the opacity-measured sample data, it cannot be
registered.
Delete the linked opacity data or change the selected
target data number.
•
If you change Observer / Illuminant after entering
input data Please note that the taget data value is
written as "---".
Start the procedure from the <Target menu> - <Input Colorimetric Target> screen.
3
72