X85; Beep - Konica Minolta CM-23d Instruction Manual

… Beep

„
Operation sounds can be set to ON or OFF.
Memo
The "Beep" setting is set to "ON" when the instrument is shipped from the factory.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Beep", and
then press the [Confirmation] key.
The <Beep> setting screen is displayed.
2
Use [▲] or [▼] to move the cursor to select ON or
OFF.
Settings
{ OFF
{ ON (Standard)
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.
105
Start the procedure from the <Setting> - <Instrument setup> screen.