Flow of Measurement
Optional settings
↓
Language selection (
↓
↓
Zero calibration (
↓
↓
* When color difference is
measured
↓
Color difference target settings
P.39)
(
(Procedure)
(1) Open the <Target>
screen.
(2) Select the target number.
(3) Measure the color
difference target.
↓
Pass/fail judgment criteria settings
P.67)
(
↓
↓
29
Basic procedure
Turning the Power ON (P.32)
P.100)
* As necessary (after initialization, etc.)
Measurement cond. setting (
* Only when required (when changing
P.34)
the measurement conditions, etc.)
P.36)
White calibration (
* When color difference
P.39)
Measurement (
(Procedure)
(1) Open the <Sample> screen.
(2) Measure the sample.
End
P.89)
↓
is not measured
↓
Simple measurement
Turning the Power ON
(P.32)
↓
Skip the initial
calibration screen
↓
When "Change to
simple mode?" appears,
select "Yes"
↓
Measurement
P.46)
(Simple mode) (
↓
End
* Configure measurement/
observation conditions
and perform calibration
as necessary.