Using Recovery Wizard To Restore Computer - Winmate M116P Series User Manual

To remove the battery pack:
1. Shut down the tablet (or put into sleep mode). Turn the tablet computer over, back facing up.
2. Push the Battery Lock Latch it to the "Unlocked" position.
3. Pull up and hold the Battery Release Slider that is spring-loaded.
4. Lift the battery out using the opening on the side of battery compartment.

5.3 Using Recovery Wizard to Restore Computer

M116P Tablet Computer has a dedicate recovery partition stored on the hard drive of the tablet to enable
quick one-key recovery process. This partition occupies about 11 GB of the storage space, and comes
built-in to each M116P Tablet Computer.
Warning! Before starting the recovery process, be sure to backup all user data, as all
data will be lost after the recovery process.
Attention! Avant de démarrer le processus de récupération, assurez-vous de
sauvegarder toutes les données utilisateur, car toutes les données seront perdues après
le processus de récupération.
Follow the procedure below to enable quick one-key recovery:
1. Plug-in the AC adapter to the tablet computer. Make sure the tablet computer stays plugged in to
power source during the recovery process.
2. Power on the tablet computer, and when the boot screen shows up, press the Fn1 button
(Recovery Key) on the front bezel OR press F6 when using an external USB keyboard to initiate
the Recovery Wizard.
3. The following screen shows the Recovery Wizard. Click on "Recovery" button to continue.
Chapter 5: Frequently Used Settings
50