Important:
The reset to default button will change all setting to default.
N660X could disconnect with system after clicking the reset to default button.
If the Disconnection happened please scan barcodes below in the following steps.
Step1. Scan the USB HID barcode:
Step 2. Then scan the USB keyboard barcode:
Step 3. Run EZConfig-Scanning again by following 4.4.6.1 Device Configuring and Setting
4.4.7.4 Adding a Prefix or Suffix
1. To add a Prefix or Suffix please click on "Data Formatting icon".
Chapter 4: Operating the Device
32