Table of Contents
Advertisement
Problem
No sound is produced.
I cannot project the tablet computer
display to another monitor.
Barcode scanner does not emit laser
beam and does not seem to work.
Barcode Scanner emits laser beam
but does not read barcode
presented to it.
I am having GPS accuracy issue
RFID scanner does not seem to
work.
Battery leaking or swollen
Solution
Adjust volume of the tablet computer by pressing on
the volume rocker.
If using an external audio device, make sure that the
cable is properly connected.
Make sure the VGA driver is installed.
Make sure the output setting selected is correct.
Make sure the Barcode scanner device is enabled in
Hottab utility.
Make sure under Windows, the Barcode Reader is set
to COM 15 port, so that Hottab can trigger the
Barcode Reader hardware.
Adjust the distance between barcode scanner of the
device and the barcode being scanned.
Make sure the barcode code type is enabled in the
tablet. To enable/disable a specific barcode code type,
go through the "Barcode Scanner Configuration"
section.
When utilizing the GPS function, we recommend
disabling the Barcode Reader in Hottab to reduce
interference.
Make sure under Windows, the RFID hardware is set
to COM 3 port.
The lithium battery used in this tablet may swell after
being charged/ discharged many times, but there is no
problem regarding safety.
Continued use in such a state may result in the battery
getting jammed, so please stop using the battery, and
purchase a new one.
Chapter 6: Troubleshooting
60
Advertisement
Table of Contents
