Winmate M116P Series User Manual
  1. Manuals
  2. Brands
  3. Winmate Manuals
  4. Tablet
  5. M116P Series
  6. User manual

Winmate M116P Series User Manual

X86 rugged tablet
Hide thumbs Also See for M116P Series:
Table of Contents

Advertisement

Quick Links

Download this manual
M116P Series
x86 Rugged Tablet
Intel® Pentium® N4200, 1.1 GHz (turbo to 2.5 GHz)
Windows® 10 IoT Enterprise
User Guide
Version 1.0
Document Part No. 91521110105G
Please read these instructions carefully before using this product, and save this manual for future use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M116P Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Winmate M116P Series

Summary of Contents for Winmate M116P Series

  • Page 1 M116P Series x86 Rugged Tablet Intel® Pentium® N4200, 1.1 GHz (turbo to 2.5 GHz) Windows® 10 IoT Enterprise User Guide Version 1.0 Document Part No. 91521110105G Please read these instructions carefully before using this product, and save this manual for future use.

  • Page 2: Table Of Contents

    11.6" Rugged Tablet M116P User Guide Contents CONTENTS CHAPTER 1: READ ME FIRST 1.1 A DVISORY ONVENTIONS 1.2 S AFETY NFORMATION 1.3 H ANDLING AND AINTENANCE 1.4 D ECLARATION OF ONFORMITY CHAPTER 2: GETTING STARTED 2.1 I NTRODUCTION 2.2 U NPACKING 2.3 D ESCRIPTION OF...

  • Page 3: Contents

    Contents 5.7.3 Perform Bluetooth Pairing CHAPTER 6: TROUBLESHOOTING 6.1 B ASIC ROUBLESHOOTING APPENDIX A: P PPENDIX RODUCT PECIFICATIONS...

  • Page 4: Chapter 1: Read Me First

    11.6" Rugged Tablet M116P User Guide Chapter 1: Read Me First 1.1 Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings.

  • Page 5: Safety Information

    Chapter 1: Read Me First 1.2 Safety Information Precaution on Battery Pack Do Not Expose the Battery Pack to Excessive Précaution avec le bloc-pile Heat, or Extreme Heat (Near Fire, in Direct Sunlight for example) Generation of heat, ignition or rupture may result Do Not Disassemble, Modify, or Insert Sharp [FR] Ne pas exposer le bloc-pile à...
  • Page 6 11.6" Rugged Tablet M116P User Guide General Product Safety  This product should not be used near water Sécurité générale des such as bathtubs, sinks, swimming pools, wet basement, etc. produits [FR] Ce produit ne dois pas être utilisé près de l'eau comme les baignoires, les éviers, les ...

  • Page 7: Handling And Maintenance

    Chapter 1: Read Me First 1.3 Handling and Maintenance Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the product. General Guideline [FR] Essuyer délicatement l'écran avec un Guide Général chiffon doux non pelucheux. Ne pas utiliser d'alcool ou un détergent sur le produit.

  • Page 8: Declaration Of Conformity (Doc)

    11.6" Rugged Tablet M116P User Guide 1.4 Declaration of Conformity (DoC) FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference.  This device must accept any interference received including interference that ...

  • Page 9: Chapter 2: Getting Started

    This chapter tells you step by step how to get the Tablet Computer up and running. 2.1 Introduction Congratulations on purchasing Winmate® 11.6-inch x86 Rugged Tablet M116P. The M116 platform is a next-generation Windows rugged tablet series designed to boost efficiency in a mobile, versatile form factor.

  • Page 10: Unpacking

    11.6" Rugged Tablet M116P User Guide 2.2 Unpacking Check and identify the supplied accessories:   Tablet Computer Standard Battery BM101 Part No. 98K000A000D6   Power Adapter Power Cord and Plugs Part No. 922D065W19V1   Capacitive Stylus Quick Start Guide & Driver CD Part No.

  • Page 11: Description Of Parts

    Chapter 2: Getting Started 2.3 Description of Parts Dimensions: 300.67 x 201.97 x 22.5 mm Front: Left: Right: Item Description Item Description Use to attach a wrist strap 11.6-inch display with String Hole or other accessories. 11.6” PCAP LED backlight, acts as Touchscreen one of the inputs for the HDMI output to external...
  • Page 12 11.6" Rugged Tablet M116P User Guide Rear: Top: Bottom: Item Description Item Description Smart Card Reader, Barcode Scanner for Smart Card Optional complies with reading of 1D/2D Reader Barcode IS07816-1.2.3T=1 and barcode. (Optional) T=Ø protocol Press power button to For optional add-on UHF turn on the tablet.

  • Page 13: Indicators

    Chapter 2: Getting Started 2.4 Indicators Icon Indicator Description Power Indicator Blue– Tablet is ON No light– Tablet is OFF Battery Status Orange–AC adapter is plugged in and charging Green–AC adapter is plugged in and battery is full charged Solid Red - Low battery (<10%) Blinking Red –...

  • Page 14: Installing A Micro Sd Card

    11.6" Rugged Tablet M116P User Guide 2. Insert the battery with the connector-pins side first, and then lower the battery into the battery compartment. Make sure the battery is completely lowered into the compartment. Once fully inserted, the Battery Release Slider automatically locks. Battery will be flat against the housing once fully inserted.

  • Page 15: Installing 4G Lte Module

    Chapter 2: Getting Started 2.6.3 Installing 4G LTE Module Notice that 4G LTE feature is optional and may not be supported by your device. Check your order specifications for more details. The Tablet Computer supports 4G LTE data connection and fits a Micro-SIM card. Before installing fits a Micro-SIM card please install the 4G LTE module.

  • Page 16: Installing Sim Card (For 4G/Lte Equipped Devices)

    11.6" Rugged Tablet M116P User Guide 2.6.4 Installing SIM card (For 4G/LTE Equipped Devices) Notice that 4G LTE feature is optional and may not be supported by your device. Check your order specifications for more details. Caution Disconnect any cords connected to the tablet computer before installation or removing battery procedure.

  • Page 17: Charging Your Tablet

    Chapter 2: Getting Started 2.6.5 Charging Your Tablet The Tablet operates either on external AC power or internal battery power. It is recommended to use AC power when you start up the Tablet for the first time. Caution Use only the AC adapter included with your Tablet Computer. Using other AC adapters may damage the Tablet Computer and the Battery.

  • Page 18: Using Lan Port (Rj45)

    11.6" Rugged Tablet M116P User Guide 2.6.6 Using LAN Port (RJ45) Notice that the LAN Port (RJ45) is optional and may not be supported by your device. Check your order specifications for more details. 1. Connect the tablet PC to external devices using LAN cable. 2.6.7 Starting the Tablet Important: When powering on the device for the first time, please make sure there’s no interruption during the Windows setting up process, for example, accidentally powering off.

  • Page 19: Chapter 3: Setting Up Windows For The First Time

    Chapter 3: Setting Up Windows for the First Time Chapter 3: Setting Up Windows for the First Time This chapter details how to setup the Windows that may be installed on the tablet for the first time. 3.1 Introduction The M116P Tablet Computer operates on Windows 10 IoT Enterprise operating system. Caution Make sure the battery is full charged before starting the Tablet Computer for the first time with internal battery power.
  • Page 20 11.6" Rugged Tablet M116P User Guide 3. On the Here's the legal stuff screen, read through the disclosures, then tap Accept. 4. Windows will then try to connect to network. Tap Skip this step to continue without a wireless connection as you can then set up the network later. 5.
  • Page 21 Chapter 3: Setting Up Windows for the First Time 6. To create a local account, type your User name, password, and Password hint in the fields provided, and then tap Next. 7. The initial setup screens are complete, and the desktop is displayed. 8.

  • Page 22: Chapter 4: Operating The Device

    This chapter describes how to operate the M116P Tablet Computer, including camera, Hottab, barcode, RFID, WWAN, WLAN, GPS features. Note: Please download the SDK from Winmate Download Center. >> M116P >> Development Kit or check the Driver CD which is shipped with the tablet.

  • Page 23: Shortcuts

    Chapter 4: Operating the Device Icon Description Allows users to configure short cut to quickly access programs with a few tabs. Shortcuts Allows users take a picture or record a video. User can also adjust setting related to camera in this menu option. Camera Enables/disables tablet computer’s hardware functions.

  • Page 24: Using Camera

    11.6" Rugged Tablet M116P User Guide 4.3 Using Camera This Hottab menu option allows users take a picture or record a video. Before use, make sure the camera is powered on under Devices ON/OFF menu with the following scenarios. To open camera interface: 1.

  • Page 25: Built-In Devices On/Off

    Chapter 4: Operating the Device 4.4 Built-in Devices On/Off This section describes how to get a quick access to set-up built-in devices, including turning on/off RF modules, setting up barcode reader, and RFID reader. Hottab Utility 4.4.1 Using the Wireless LAN (Wi-Fi) To use the wireless LAN (Wi-Fi) feature to connect to the network, perform the following procedure: 1.

  • Page 26: Using The Gps

    11.6" Rugged Tablet M116P User Guide To connect to the network using wireless WAN: 1. Launch the Hottab Utility 2. Tap on the Device ON/OFF button. 3. Check the status color of the WWAN icon: Item Status Color Description Orange WWAN (3G/ 4G) is enabled.

  • Page 27: Using The Bluetooth

    Chapter 4: Operating the Device 4.4.5 Using the Bluetooth To enable the Bluetooth: 1. Launch the Hottab Utility 2. Tap on the Device ON/OFF button. 3. Check the status color of the Bluetooth icon: Item Status Color Description Orange Bluetooth is enabled. White Bluetooth is disabled.

  • Page 28: Using The Barcode Reader

    PC is built-in barcode reader before use, or contact our sales contact window for more details. Note: Download the SDK from Winmate Download center here. >> M116P >> Development Kit or check the Driver CD which is shipped with the tablet.
  • Page 29 Chapter 4: Operating the Device 4.4.7.1 Device Configuring and Setting 1.Click on Windows and search for EZConfig-Scanning from the Start menu. 2.Click on EZConfig-Scanning v4_IE and allow the blocked content if browser is blocking the content. 3.Click on “Connected Device” icon and wait for system to discover the device (Honeywell N660X).
  • Page 30 11.6" Rugged Tablet M116P User Guide 4.Once Honeywell N660X is discovered please click “Configure Device” button as shown. 4.4.7.2 Scanning Mode Settings 1. Click Device Settings under the Input/Output settings section. 2. Select the desire scanning mode from the drop-down menu shown as below.
  • Page 31 Chapter 4: Operating the Device 3. After selecting a desire scanning mode, click on the “Save to Device” on the side bar. Scanning Mode Description Manual Trigger When in manual trigger mode, the scanner scans until a bar code is read, or until the trigger is released.
  • Page 32 11.6" Rugged Tablet M116P User Guide 4.4.7.3 Setting the 1D/2D Barcode Scanner Symbologies The barcode scanner is shipped with default settings shown below. If the default setting suits the usage requirement, setting symbologies is not necessary. Symbologies Default Settings: Symbologies Default UPC-A Enable...
  • Page 33 Chapter 4: Operating the Device Important: The reset to default button will change all setting to default. N660X could disconnect with system after clicking the reset to default button. If the Disconnection happened please scan barcodes below in the following steps. Step1.
  • Page 34 11.6" Rugged Tablet M116P User Guide 2.Click on Editor button under the Prefix or Suffix section and create Prefix/Suffix value by typing in the block or select desire characters in the Control chars, Printable chars, and Extended ASCII. as shown below: 3.

  • Page 35: Using The Hf Rfid Reader

    Chapter 4: Operating the Device 4.4.8 Using the HF RFID Reader The HF RFID Reader is optional for M116P Tablet PC and is not re-workable by the end user. To use this feature, please make sure the tablet PC is built-in HF RFID reader before use, or contact our sales contact window for more details.
  • Page 36 11.6" Rugged Tablet M116P User Guide 4.4.8.1 RFID Trigger Setting Auto Scan The default setting for RFID trigger is Auto Scan. Under this setting, the RFID Reader will always be ready to scan tags. When the RFID tag is detected from RFID antenna, the data will be read automatically.
  • Page 37 Chapter 4: Operating the Device 4.4.8.2 Settings Sound The Sound check box defines whether a beep sound will come with the data scanning. Output to This setting defines the output type of the scanned data. Two options are available: Keyboard Wedge Under this setting, the data scanned is sent like keyboard data.
  • Page 38 11.6" Rugged Tablet M116P User Guide Item Description Prefix User can type in this field to define the characters BEFORE the data scanned. Suffix User can type in this field to define the characters AFTER the data scanned. The check box user can defines to append an “Enter” which is Append Enter followed by the characters.

  • Page 39: Turn On/Off The Light Sensor

    Chapter 4: Operating the Device Note: User can download the SDK from Winmate Download center website >> M116P >> Development Kit or check the Driver CD which is shipped with the tablet. 4.4.8.3 RFID Output Setting Select The default setting for built-in HF RFID Reader is to Read UID. For some RFID applications, user might need to read or write further block data;...

  • Page 40: Changing Touchscreen Modes

    11.6" Rugged Tablet M116P User Guide 4.4.10 Changing Touchscreen Modes The tablet computer supports three built-in operating modes for different usage scenarios: Mode Description In Hand/Rain mode the touchscreen rejects false inputs from liquid drops. When the liquid is removed, the touchscreen accepts touch inputs from bare fingertips. Supports input by: ...

  • Page 41: Using The Expansion Module

    Chapter 4: Operating the Device Launch the Hottab Utility Tap on the Setting button. Tap on F1 icon. Tap on the Long Press icon. Change the Long Press function to “Touch Mode” as shown below: Once the touchscreen mode switching is set to the programmable function button, Long Press on “F1” function button to cycle through the different touchscreen modes.

  • Page 42: Uhf Rfid Reader Module

    4.4.12 UHF RFID Reader Module The UHF RFID Reader is optional for M116P Tablet PC. Note: Download the SDK from Winmate Download center. >> M116P >> Development Kit or check the Driver CD which is shipped with the tablet. 4.4.12.1 How to Install Remove expansion port cover from the rear side of Tablet PC.
  • Page 43 Chapter 4: Operating the Device 4.4.12.2 How to Use Launch the Hottab Utility Choose “Device ON/OFF” and click on “Ext. Module”, and the setting utility will show up as below: Tap on the ON button. Check the status color of the ON icon is green. Trigger Setting Auto Scan The default setting for UHF RFID trigger is Auto Scan.
  • Page 44 11.6" Rugged Tablet M116P User Guide User can also define the UHF RFID Reader scanning as SINGLE SCAN. Under this setting, the UHF RFID Reader will be triggered only when user click on “Send”. Settings Sound The Sound check box defines whether a beep sound will come with the data scanning. Region Based on different regional regulations about UHF RFID frequencies, user can switch frequency to NA (North America, 902-928 MHz) or EU3 (Europe, 865-868 MHz)from the drop-down menu shown as...
  • Page 45 Chapter 4: Operating the Device RFID Output To This setting defines the output type of the scanned data. Two options are available: Keyboard Wedge Under this setting, the data scanned is sent like keyboard data. The scanned data can be output directly to the demo area below this window, or user can also open other utility, such as Office Word or Notepad files, for data input.
  • Page 46 11.6" Rugged Tablet M116P User Guide Suffix Type in this field to define the characters AFTER the data scanned. Append Enter To define to append an “Enter” this is followed by the characters. Append TAB To define to append a “TAB” this is followed by the characters. Regex Filter Press on “Presets…”...
  • Page 47 Chapter 4: Operating the Device Disconnect / Connect User can tap on the Disconnect button to stop the connection with UHF RFID Reader. *To recover the connection, please turn off the module from setting UI and then turn on the module again.

  • Page 48: Chapter 5: Frequently Used Settings

    11.6" Rugged Tablet M116P User Guide Chapter 5: Frequently Used Settings 5.1 Screen Resolution Scaling and Setting The M116P rugged tablet’s 1920 x 1080 Full HD high resolution display is perfect for viewing image, video, or other applications; however, Windows user interface (icons, buttons, and other user interface elements) may be too small to read and operate at the default Windows settings.

  • Page 49: Changing Screen Resolution

    Chapter 5: Frequently Used Settings 5.1.2 Changing Screen Resolution Alternatively, instead of changing the display scaling setting, user may choose to change the overall resolution setting to make screen elements bigger. 1. Tap and hold anywhere on the desktop for 3 seconds and release to bring up the context menu, and select “Display settings”...

  • Page 50: Replacing Battery

    11.6" Rugged Tablet M116P User Guide 2. Click on the dropdown option next to “Resolution” and select the desire resolution by tapping on the scale: 3. Hit “Apply”. A prompt “Display Settings” prompt will show up to ask the user if the applied resolution is usable.

  • Page 51: Using Recovery Wizard To Restore Computer

    Chapter 5: Frequently Used Settings To remove the battery pack: 1. Shut down the tablet (or put into sleep mode). Turn the tablet computer over, back facing up. 2. Push the Battery Lock Latch it to the “Unlocked” position. 3. Pull up and hold the Battery Release Slider that is spring-loaded. 4.
  • Page 52 11.6" Rugged Tablet M116P User Guide 4. A warning message about data loss will show up. Make sure data is backed up before recovery, and click on “Yes” to continue. 5. Wait till the recovery process to complete. During the recovery process, a command prompt will show up to indicate the percent of recovery process.

  • Page 53: Docking Connector Pin Definition

    Chapter 5: Frequently Used Settings 5.4 Docking Connector Pin Definition M116P tablet computer supports one 19-pin docking connector at the bottom side. The pin definition is listed as the following table. Pin No. Description Pin No. Description RF_GND DOCK_DET GPS ANT RF_GND Power RF_GND...

  • Page 54: Gigalan Port Definition

    11.6" Rugged Tablet M116P User Guide Tap on "Port Setting" tab and click on "Advanced" button. Tap on the dropdown list and choose the correct COM Port Number (refer to the COM Port Definition Table), and click "OK". Double-check "Device Manager" to make sure the COM Port number has been re-defined successfully, and then restart the system.

  • Page 55: Pairing With A Wireless Bluetooth Barcode Scanner

    Chapter 5: Frequently Used Settings 5.7 Pairing with a Wireless Bluetooth Barcode Scanner The computer is affixed with a Bluetooth MAC (Media Access Control) address barcode label that enables wireless Bluetooth Barcode Scanner to quickly establish Bluetooth connection with the computer.
  • Page 56 11.6" Rugged Tablet M116P User Guide 4. go to “Options” tab, and make sure that in the Discovery section, the computer is set to “Allow Bluetooth devices to find this computer”, as shown below: Click OK to continue. 5. In the Bluetooth Settings menu, go to “COM Ports” tab. COM port has to be setup for the wireless Bluetooth Barcode Scanner to communicate via the Bluetooth Serial Port Profile.
  • Page 57 Chapter 5: Frequently Used Settings 6. You are in “Add COM Port” window. Choose “Incoming (device initiates the connection)”, and click “OK”. 7. The computer will automatically assign COM Port to the Bluetooth connection. In the screenshot below, COM4 is allocated. Click OK to continue.

  • Page 58: Set Up The Barcode Scanner For Bluetooth Pairing

    11.6" Rugged Tablet M116P User Guide 8. Next, the user has to configure the application that is used to accept the scanned data from the wireless Bluetooth Barcode Scanner. The application has to be configured to accept the same COM Port that has been assigned for the Bluetooth Serial Port Profile in the previous step. Important: Make sure the application stays open while pairing.
  • Page 59 Chapter 5: Frequently Used Settings 5. In Add a Bluetooth Device window, click Next to connect the Barcode Scanner to the Computer. In order to ensure that Bluetooth Device is successfully pared to the Computer, follow the steps below: 1. Locate the Bluetooth icon in the Notification Area. Select Show Bluetooth Devices. You can access this menu in the Control Panel: Control Panel ...

  • Page 60: Chapter 6: Troubleshooting

    11.6" Rugged Tablet M116P User Guide Chapter 6: Troubleshooting 6.1 Basic Troubleshooting Problem Solution  The removable battery is not Make sure the AC adapter is properly connected, and charging. that the removable battery is properly inserted.  Nothing appears on the screen. The tablet computer may be in sleep mode.
  • Page 61 Chapter 6: Troubleshooting Problem Solution  No sound is produced. Adjust volume of the tablet computer by pressing on the volume rocker.  If using an external audio device, make sure that the cable is properly connected.  I cannot project the tablet computer Make sure the VGA driver is installed.

  • Page 62: Appendix

    M116P Rugged Tablet User Guide Appendix Appendix A: Product Specifications M116P Model Name M116PT Size 11.6-inch display with LED Backlight 11.6-inch display with LED Backlight Resolution 1920 x 1080 Full HD 1920 x 1080 Full HD 850 nits with direct optical bonding 850 nits with direct optical bonding for Panel Brightness for sunlight readability...
  • Page 63 Appendix Model Name M116P M116PT Built-in dual digital mic with noise Built-in dual digital mic with noise Microphone cancellation cancellation Audio Speaker 2 x 1 watt front-facing speakers 2 x 1 watt front-facing speakers Web Camera 2MP front camera 2MP front camera Cameras 8MP rear camera with autofocus 8MP rear camera with autofocus and...
  • Page 64 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C www.winmate.com Copyright © 2018 Winmate Inc. All rights reserved.

This manual is also suitable for:

M116pM116pt

Table of Contents