4.4.12.2 How to Use
1.
Launch the Hottab Utility
Choose "Device ON/OFF" and click on "Ext. Module", and the setting utility will show up as
2.
below:
3.
Tap on the ON button.
4.
Check the status color of the ON icon is green.
Trigger Setting
Auto Scan
The default setting for UHF RFID trigger is Auto Scan. Under this setting, the UHF RFID Reader will
always be ready to scan tags.
1.
When the UHF RFID tag is detected, the data will be read automatically.
2.
User can define the UHF RFID scanning frequency from the drop-down menu shown as below.
The frequency can be from 1 second to 9 seconds.
Single Scan
.
Chapter 4: Operating the Device
42