Using Recovery Wizard To Restore Computer - Winmate M133TG Series User Manual

31
13.3-inch Ultra-Rugged Tablet M133TG User Manual

6.3 Using Recovery Wizard to Restore Computer

The M133TG Ultra Rugged Tablet has a dedicate recovery partition stored on the hard drive of the
tablet to enable quick one-key recovery process. This partition occupies about 11 GB of the
storage space, and comes built-in to each tablet computer.
Warning! Before starting the recovery process, be sure to backup all user data,
as all data will be lost after the recovery process.
Attention! Avant de démarrer le processus de récupération, assurez-vous de
sauvegarder toutes les données utilisateur, car toutes les données seront perdues
après le processus de récupération.
To enable quick one-key recovery procedure:
1. Plug-in the AC adapter to the tablet computer. Make sure the tablet computer stays plugged
in to power source during the recovery process.
2. Power on the tablet computer, and when the boot screen shows up, press the Fn1 button
(Recovery Key) on the front bezel OR press F6 when using an external USB keyboard to
initiate the Recovery Wizard.
3. The following screen shows the Recovery Wizard. Click on "Recovery" button to continue.
4. A warning message about data loss will show up. Make sure data is backed up before
recovery, and click on "Yes" to continue.