Table of Contents
Advertisement
35
11.6" Rugged Tablet M116P User Guide
4.4.8.1 RFID Trigger Setting
Auto Scan
The default setting for RFID trigger is Auto Scan. Under this setting, the RFID Reader
will always be ready to scan tags.
1.
automatically.
2.
as below. The frequency can be from 1 second to 9 seconds.
Single
User can also define the RFID Reader scanning as Single Scan. Under this setting, the
RFID Reader will be triggered only when user click "Send".
Scan
When the RFID tag is detected from RFID antenna, the data will be read
User can define the RFID scanning frequency from the drop-down menu shown
Advertisement
Table of Contents
