3
Assemble Bases to Columns
i. If required, unscrew the levelling feet (part A 5) on the base (part A 1) and replace
with the castors (part B1) before attaching the base to the columns.
NOTE:
Ensure castors
are set on the
braked position
for assembly.
ii. On the floor and attach the bases (part A 1) to the columns (part C1) using the
support stems (part A 2), M8 x 90mm screws (part A 3) and washers (part A 4).
Once bases are fixed, return stand to upright position.
IMPORTANT:
If mounting a shelf, insert the
M8 sliding nuts before
attaching base to column.
12
A5
B1
A1
C1
THREADED
A1
A4
A3
A2
A6