ii. On the floor, lay the columns (part C1) on the mounting rails (part E1) so the joining plates
(part D1) are face down. A ttach the mounting rails (part E1) to the columns using the
joining plates, fastening M8 x 12mm screws (part D3) into the inserted M8 sliding nuts
(part D2).
Note: The distance between the two vertical columns should be approx. 1300mm - 1500mm
WRONG
CORRECT
Assemble
as shown
E1
X
E1
C1
D5
D1
D3
D3
D1
E1
C1
E1
D2
11