Advertisement
Quick Links
BT8353
POP-OUT, MODULAR FREESTANDING
CURVED VIDEOWALL MOUNT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Stand
PLEASE KEEP THIS PARTS LIST FOR FUTURE REFERENCE
Installation Safety Notes.......................................................................................... 2
Parts List.................................................................................................................. 4
Floor Spacer Options. . ..............................................................................................6
Base Position.................................
Installation Instructions...........................................................................................10
Accessories................................. ............................................................................22
B-Tech Contact Details...........................................................................................24
INSTALLATION TOOLS REQUIRED
Crosshead
screwdriver
B-TECH AV MOUNTS
FEATURES
•
Designed for narrow bezel monitors of 46", 49" and 55"
up to 50kg (110lbs) per monitor
•
Modular design allows quick and easy assembly and
disassembly of videowalls
•
System X interface mounts up to VESA 600 x 400mm
•
Features pop-in, pop-out function to aid installation and to
allow easy service access to rear of screens
• Adjustable brackets allow column angles to be adjusted up to 30º
•
Tool-less micro-adjustments for seamless display alignment
•
Suitable for landscape or portrait screen mounting
•
Captive, fast fit nuts and screws for quick assembly / disassembly
•
Safety screws help prevent unauthorised removal of screens
•
Strong steel structure
•
Bases can be reversed to save space at the front of the stand*
*Additional ballast may be required
•
Covers on floor spacers and base as standard
CONTENTS
..............................................................................................8
...........................................................
Level
www.btechavmounts.com
55"
50kg
140cm
Per Screen
6AF Hex Key
. ...............9
Advertisement
Related Manuals for B-Tech BT8353
Summary of Contents for B-Tech BT8353
-
Page 1: Table Of Contents
Installation Safety Notes..................2 Parts List........................4 Floor Spacer Options....................6 Floorstand Stability....................8 Base Position......................9 Installation Instructions...................10 Accessories......................22 B-Tech Contact Details...................24 INSTALLATION TOOLS REQUIRED Crosshead Level 6AF Hex Key screwdriver B-TECH AV MOUNTS www.btechavmounts.com... -
Page 6: Floor Spacer Options
FLOOR SPACER OPTIONS The table below shows the floor spacer options available to use for videowalls in a landscape display with their spacing distance from the floor to the bottom of the bottom screen (cm). LANDSCAPE Floor Spacer using Feet Screen Size (Distance from floor to bottom of screen - cm) - Page 7 FLOOR SPACER OPTIONS The table below shows the floor spacer options available to use for videowalls in a portrait display with their spacing distance from the floor to the bottom of the bottom screen (cm). PORTRAIT Screen Floor Spacer Using Feet (Distance from floor to bottom of screen - cm) Size 46"...
-
Page 8: Floorstand Stability
INSTALLATION NOTES Must be used on level floor (no inclination) FLOORSTAND STABILITY For reasons of safety, where necessary secure the top of the structure to a solid wall. When verifying the stability of the structure, consider the following external factors: 1. -
Page 10: Installation Instructions
INSTALLATION INSTRUCTIONS Level the Base Use a level and adjust feet to level the base. Side view BASE ADJUSTABLE FEET LEVEL Attaching Castors to Base for Mobile Videowalls Apply the brakes on the castors first. Remove the Feet and screw each castor into the base. Before adding frames onto the base. - Page 11 Attach Back Frame to Base Use guides to align into the holes on the base BACK FRAME BASE IMPORTANT Ensure captive screw is at the front Hand tighten 3 captive screws...
- Page 13 Level the Next Base Sit the next base down to the right hand side of the first base. Use a level across both bases and adjust feet to level base. Note: Always build from left to right. BASE LEVEL Attach Back Frame and Floor Spacer Repeat steps 2 &...
- Page 17 iv. Use the angle and distance measurement to set up the remaining columns. Note: The screens can be removed during this process to avoid damaging them. Top View Equal Angles v. Once angle is set, fit screws ALLEN KEY but do not fully tighten. ANGLE SUPPORT vi.
- Page 20 Adjust to Align the Screens for a Seamless Videowall Adjust the top row first and work down row by row. Micro-adjust top row first HEIGHT ADJUSTMENT Use the depth adjustment knobs Note: Light pressure to ensure that each corner of the in the desired direction screen is aligned evenly.
- Page 21 Secure Screens to Stand Secure all interface arms onto rails by tightening the safety screws. SAFETY SCREW ENGAGED SAFETY SCREW Servicing the flat screens Ensure the locking screw is in the unlocked position (refer to Step 16). Push central at the top and bottom of the screen on the bezel to release...
-
Page 22: Accessories
Disabling the pop-out function (optional) To prevent the mount from being able to pop-out, tighten the locking screw at the bottom of both the interface arms. Note: The pop-out prevention LOCKING SCREW locking screws must be wound Unlocked postion in fully when the interface arms are closed to prevent them from SAFETY SCREW... - Page 23 ACCESSORIES BT8350-WB Weight Box (if required) Used to store users own weight for ballast. WEIGHT BOX BASE BT8350-WP Weight Plates (if required) Used for ballast. BASE WEIGHT PLATES Weight Plates: 5kg per plate...
-
Page 24: B-Tech Contact Details
B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd. B-Tech, Better By Design & System 2 are registered trademarks of B-Tech International Design & Manufacturing Ltd. All other brands and product names are trademarks of their respective owners.