Advertisement
Quick Links
BT8370-3X3-60
UNIVERSAL VIDEO WALL STAND
FOR 3x3 VIDEO WALLS
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Stand
PLEASE KEEP THIS FOR FUTURE REFERENCE
Installation Safety Notes......................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions........................................................................................................................7
Optional Accessories........................................................................................................ ................18
Product Dimensions..........................................................................................................................19
B-Tech Contact Details......................................................................................................................20
INSTALLATION TOOLS REQUIRED
Crosshead
screwdriver
B-TECH AUDIO VIDEO MOUNTS
FEATURES
• Designed to mount 9 screens in a 3x3 video wall
formation
• Universal stand suitable for video wall screens
from 55" - 60" (139cm - 152cm)
• Max weight per screen: 50kg
• Designed for screens with VESA & non-VESA
mounting patterns: 200 x 200 up to 600 x 400mm
• Suitable for landscape or portrait screen mounting
• Tool-less micro-adjustments at 8 points for seamless
screen alignment
• Stand Dimensions:
W. 3505mm D. 950mm H.2498mm up to 2699mm
• Collar compatible accessories such as shelves
can be fitted directly to the extrusion
• Integrated cable management
• All mounting hardware included
CONTENTS
Level
www.btechavmounts.com
50kg
PER SCREEN
Knife
TM
Advertisement
Related Manuals for B-Tech System X BT8370-3X3-60
Summary of Contents for B-Tech System X BT8370-3X3-60
-
Page 1: Table Of Contents
• Integrated cable management • All mounting hardware included 50kg PER SCREEN CONTENTS Installation Safety Notes........................2 Parts List.............................4 Installation Instructions........................7 Optional Accessories........................18 Product Dimensions..........................19 B-Tech Contact Details........................20 INSTALLATION TOOLS REQUIRED Crosshead screwdriver Level Knife B-TECH AUDIO VIDEO MOUNTS www.btechavmounts.com... -
Page 2: Installation Safety Notes
Please check carefully to make sure there are no missing or defective parts - defective parts must never be used. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. - Page 3 Spole nost B-Tech International Ltd. doporu uje provést instalaci tohoto produktu prost ednictvím odborného instalátora AV i jinak zp sobilé osoby. Spole nost B-Tech International Ltd, její distributo i a prodejci nenesou odpov dnost za škody nebo zran ní zp sobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné...
-
Page 4: Parts List
BT8370-3X3-60 PARTS LIST MOUNTING RAIL JOINING BARS BT8390-150 (x6) BT8390-EXT (x3) COLUMN JOINING PLATE BT8380-240 (x3) BT8380-JPK (x9) Optional - To fix shelves to a vertical column BASE BT8380-BASE (x3) - Page 5 BASE TOTAL PART NAME BASE SPACER BT8390-SP (x1) SUPPORT STEM M8 x 90mm SCREW M8 WASHER LEVELLING FOOT 6AF HEX KEY 24mm SPANNER COLUMN TOTAL PART NAME VERTICAL COLUMN PLASTIC SLOT INSERT INTERFACE ARMS CABLE COVER END CAP BT8390-VESA400MAF (x9) M8 SLIDING NUT M8 x 16mm SCREW JOINING KIT...
- Page 6 INSTALLATION NOTES • Min. two person assembly • Approx. minimum floor space required for assembly: 5m • Floor fixing kit available BT8380-FBK - see page 18 • Castors available separately BT8380-CASTORS FLOORSTAND STABILITY • Install stand on level ground When verifying the stability of the structure, consider the following external factors: 1.
-
Page 7: Installation Instructions
INSTALLATION INSTRUCTIONS Assemble Joining Plate i. Connect together four M8 x 16mm screws (part C4) with M8 sliding nuts (part C2) on each joining plate (part C1). - Page 8 Attach the Joining Plate to Column cont... ii. Lay column (part B1) on the floor and slide three joining plates (part C1) onto each column. IMPORTANT: BOTTOM Make sure the end with M8 threads are on the bottom of the Vertical Column...
- Page 9 iii. Use the spacer (part F1) to set distance between the each joining plate (part C1) on the column (part B1) according to the screen size. Once set, tighten all M8 x 16mm screws (part C4) on joining plate with hex key (part C5). ADJUSTMENT KNOB Leave at least...
- Page 10 Combine 2 Mounting Rails together using the BT8390-EXT i. On the intended front facing side of the mounting rail (part D1) insert 4 x joining bars (part E1) half-way into each slot, on the back side insert 1 x joining bar into the top slot and 1 x joining bar into the third slot.
- Page 11 Attach Columns to Mounting Rails On the floor, lay the columns (part C1) equal distance apart on the mounting rails (part E1) so the joining plates are face down. Attach the mounting rails (part E1) to the columns (part C1) by using the joining plates (part D1) and fastening the M8 x 12mm screws (part D3) into the inserted M8 sliding nuts (part D2).
- Page 12 Assemble Bases to Columns On the floor and attach the bases (part A1) to the columns (part B1) using the support stems (part A2), M8 x 90mm screws (part A3) and washers (part A4). Once bases are fixed, return stand to upright position. IMPORTANT: If mounting a shelf, insert the M8 sliding nuts before...
- Page 13 Attach Interface Arms to Screen Attach the interface arms (parts G1 and G2) to the back of the screen using the screen fixing kit (parts A-F). INTERFACE ARM LEFT SCREEN FIXING KIT A B C INTERFACE ARM RIGHT Use spacers for screens with recessed fixings...
- Page 14 Hook the Screens onto the Stand i. Hook the first screen centrally onto the bottom rail and align screen with the horizontal centre of the trolley / stand ii. Using a level, align the flat screen to the floor using the Z axis adjustment knobs. iii.
- Page 15 Lateral Adjustment X axis iv. Hook on the remaining flat screens.
- Page 16 Align and Secure Screens i. Use the Y & Z micro-adjustment knobs on interface arms to align screens. ii. When the screens are all positioned correctly, tighten the safety screws on the bottom of each interface arm (parts G1 & G2) to secure to stand. Y AXIS Note: Light pressure in Total Z axis...
- Page 17 Add End Caps and Cable Management Covers i. After screen cables are connected, slide the cable management covers (part B3) down the rear of columns (part B1). ii. Fit end caps (parts B4 & D2) to the columns and mounting rails (parts B1 & D1). iii.
-
Page 18: Optional Accessories
Insert 2 x M8 sliding nuts (parts B5) into the column (part B1) front slots before attaching base to stand. Mount a B-Tech Shelf (BT7032 / BT7172 / BT7172 / BT7173) by fastening the M8 x 16mm screws (part B6) to the M8 sliding nuts. -
Page 19: Product Dimensions
BT8370-3X3-60 PRODUCT DIMENSIONS 3505mm 1750mm 1750mm 404mm 1250 - 1550mm 97.5mm 950mm THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT. -
Page 20: B-Tech Contact Details
©2015 B-Tech International Limited. All rights reserved. B-Tech Audio Video Mounts is a division of B-Tech International Limited. B-Tech, Better By Design & System X are registered trademarks of B-Tech International Limited. All other brands and product names are trademarks of their respective owners.