Download
Share
Print this page
  1. Manuals
  2. Brands
  3. B-Tech Manuals
  4. Racks & Stands
  5. BT8375
  6. Installation manual

B-Tech BT8375 Installation Manual

Curved universal bolt-down videowall stand
Hide thumbs

Advertisement

Quick Links

Download this manual
BT8375
CURVED UNIVERSAL
BOLT-DOWN VIDEOWALL STAND
INSTALLATION GUIDE
SPECIFICATIONS
• Recommended screen size: 39"- 70"
• Max weight per screen: 50kg (110lbs)
• Suitable for landscape or portrait mounting
• Angle adjustment range: +/- 45° between screens
• Safety screws help prevent unauthorised removal of screens
• All mounting hardware included
Note: This assembly manual covers di erent installations. Some
parts or procedures shown may not be required for installation.
Please refer to page 5
for VESA® xings
www.btechavmounts.com
TM
PER SCREEN

Advertisement

loading

Related Manuals for B-Tech BT8375

Summary of Contents for B-Tech BT8375

  • Page 1 BT8375 CURVED UNIVERSAL BOLT-DOWN VIDEOWALL STAND INSTALLATION GUIDE SPECIFICATIONS • Recommended screen size: 39”- 70" • Max weight per screen: 50kg (110lbs) • Suitable for landscape or portrait mounting • Angle adjustment range: +/- 45° between screens • Safety screws help prevent unauthorised removal of screens •...

  • Page 2: Table Of Contents

    It is recommended that periodic inspections of the product and its xing points are made as frequently as possible (no more than 6 months apart) to ensure that safety is maintained. B-Tech AV Mounts recommends that a suitably quali ed person is used for the removal of this product.
  • Page 3 B-Tech AV Mounts recommends that a professional audio video installer or other suitably quali ed person install this product. B-Tech AV Mounts, its distributors and dealers are not responsible for or responsible for any damage or injury caused by improper installation. This product must be mounted on a suitable structure and it should only be used supporting the maximum weight indicated.

  • Page 4: Parts List

    BT8375 PARTS LIST Due to the multiple installations available the quantity for each option below is dependent on the mount ordered. All these components can be moved or carried by manpower. Please be careful to avoid injury when PLEASE KEEP THIS FOR FUTURE REFERENCE handling these components before &...
  • Page 5 ANGLE BT8390-AAC ADJUSTMENT CONNECTOR ITEM PART NAME PER PACK ANGLE CONNECTOR M8 x 16mm SCREW M8 WASHER M8 x 12mm SCREW M8 SLIDING NUT 5AF HEX KEY SPACER BT8390-SP PART NAME ITEM PER PACK SPACER INTERFACE KIT Screen Interface Arms BT8390-VESA400MAP BT8390-VESA400MAF PART NAME...

  • Page 6: Typical Installation

    Drill Pencil Crosshead Spanner screwdriver Knife/Cutter Level (Optional) BT8375 MAX LOAD CONFIGURATIONS INSTALLATION notes MAX. COLUMN HEIGHT 4.2M FLOORSTAND STABILITY Note: Screen weight must be evenly spread up the vertical column NOTE: Larger installs may require the use of a BT8380-WTB •...
  • Page 7 OPTIONAL EXTENDING THE COLUMNS EXTEND VERTICAL COLUMNS i. Insert item B7 halfway into the non-threaded end of item B1. The two joining bars with item B8 go in the front of the column and the 2 joining bars with item B9 go in the back. IMPORTANT: Joining bars should be inserted into the non-threaded end of...

  • Page 8: Installation Instructions

    INSTALLATION INSTRUCTIONS ATTACH JOINING PLATES TO COLUMNS i. On item C1, assemble 4x item C3 to item C2. ii. Lay the column on the oor and t item C1 to item B1. IMPORTANT: Make sure the end with M8 threads are at the bottom of the columns.
  • Page 9 iii. Use item E1 to set the distance between items C1 on item B1 according to the screen size. Once set, tighten item C3. ADJUSTMENT KNOB Leave at least a 5mm gap at top of column for item B2.
  • Page 10 INSERT SLIDING NUTS INTO MOUNTING RAILS i. Lay the rail on the oor and for each item C1 used, insert 4x item C2 into item D1. Two in the 2nd channel and two in the bottom channel. ii. To attach item E1 to the rail, insert 4x item E5 into the end of item D1. Two in each centre channel. Angle Adjustment Connector Column / Joining Plate Assembly...
  • Page 11 CONNECT RAILS TOGETHER USING THE ANGLE ADJUSTMENT i. Assemble items E2 & E3 to item E1. Do not fully tighten the screws and washers. ii. With the rails at on the oor, x item E1 to 2 x item D1 using items E3, E4 & E5. Make sure all rails are xed using the same positions on item E1*.
  • Page 12 ATTACH COLUMNS TO RAILS On the oor, place item B1 onto item D1. Attach item C1 to item D1 by fastening item C3 into the inserted items C2. Note: To ensure straight assembly of item B1 make sure the distance of items C1 to the end of item D1 are set the same on each rail.
  • Page 13 ASSEMBLE BASES TO COLUMNS Attach item A1 to item B1 using items A3, A4 & A5. Note: Once bases are xed to columns, return stand to upright position. THREADED...
  • Page 14 FIX ANGLE Set the angle required on item E1 and fully tighten all screws with item E6. 86mm BOLT STAND TO THE FLOOR BASE DIMENSIONS Pre-drill holes in oor and using suitable ground anchor xings (not supplied), x stand to oor. 10.5mm 165mm GROUND ANCHOR...
  • Page 15 ATTACH INTERFACE ARMS TO SCREEN (BT8390-VESA400MAF ARMS) Attach items G1 & G2 to the back of the screens using items A-F. Note: Ensure the arms are SCREEN FIXING KIT facing the correct way round and the same holes are used on both arms. Note: Use spacers for screens with recessed xings SCREEN SCREEN...
  • Page 16 ATTACH POP-OUT INTERFACE ARMS TO SCREENS (BT8390-VESA400MAP ARMS) Attach items G1 & G2 to the back of the screens using items A-F. Note: Ensure the arms are facing the correct way round and the same holes are used on both arms. SCREEN SCREEN RECESS...
  • Page 17 BT8390-VESA400MAP ARMS ii. Connect interface arms with the adjustable brace. Extend item G3 and x at desired length by tightening the 2 screws. Note: Item G3 is only suitable for horizontal VESA xings between 400 - 600mm. The 3 notches show the position for interface xings at 400mm, 500mm and 600mm. For screens with interface holes 600mm apart, extend brace to the 600 settting.
  • Page 18 HOOK SCREEN ONTO THE STAND i. Hook the rst screen centrally onto the bottom rail and align screen with the horizontal centre of the stand. ii. Align the screen to the oor using the height adjustment (Y Axis) knobs - See page 20. Note: If mounting 3 or more screens across, mount the rst screen centrally onto the bottom rail.
  • Page 19 MOUNT SCREENS ONTO THE STAND Hook the remaining screens onto the stand. Note: A 1mm gap between screens should be maintained.
  • Page 20 ALIGN SCREENS USING MICRO-ADJUSTMENT i. Align the screen to the oor using the height adjustment (Y Axis) knobs. ii. Use the depth adjustment (Z Axis) knobs to ensure the screen is perpendicular with the oor to ensure that each corner of the screen is aligned evenly. Note: Micro-adjust top row rst and work down row by row.
  • Page 21 SECURE SCREENS Once screens are aligned, tighten the safety screws on the bottom of items G1 & G2 SAFETY SCREW BT8390-VESA400MAP SERVICING SCREENS (POP-OUT ARMS ONLY) Items G1 & G2 Push centrally at the left and right of the screen popped-out to pop-out the mount.
  • Page 22 ADD END CAPS & CABLE MANAGEMENT COVERS i. Once all the screens and power cables are connected and if possible routed down the back of item B1, partially clip on items B3 (this allows easy removal if more cables need adding).

  • Page 23: Product Dimensions

    Depth Adjustment 103.7mm INTERFACE ARMS BT8390-VESA400MAP 18.8mm 237.2mm (Tolerance 1mm) 100.7mm 68.7mm (Closed depth) 110.9mm +/-10mm Depth Adjustment THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.

  • Page 24: B-Tech Contact Details

    ©2021 B-Tech International Design and Manufacturing Ltd. All rights reserved. B-Tech AV Mounts is a division of B-Tech International Design and Manufacturing Ltd. B-Tech AV Mounts and the B-Tech logo are registered trade marks. All other brands and product names are trademarks of their respective owners.