Residual Heat Indicator; Setting The Power Level - Extended Setting Range; Powerflex Area - Miele KM 7404 FX Operating And Installation Instructions

Residual heat indicator

If a cooking zone is still hot, the residual
heat indicator will light up after it has
been switched off.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.

Risk of burning on hot cooking
zones!
The cooking zones will be hot after
use.
Do not touch the cooking zones
while the residual heat indicators are
on.
Setting the power level -
extended setting range
 Touch the numerical keybank
between two number sensors.
The power level selected flashes in the
display for a few seconds to start with
and then lights up constantly. The
intermediate setting will be represented
by an illuminated dot next to the
number.

PowerFlex area

The PowerFlex cooking zones combine
automatically to form a PowerFlex
cooking area when you place a
sufficiently large pot or pan on them
(see "Overview - Cooktop"). Settings for
the linked cooking area are controlled
by the numerical keybank of the front or
left PowerFlex zone (depending on
model). The PowerFlex cooking area
can also be switched on and off
manually.
Position the pan centrally on the
PowerFlex cooking area.
Manually switching PowerFlex
cooking zones on together/
separately
 Touch the  or  sensor
(depending on model).
Operation
39