Switching On The Cooktop; Setting The Power Level; Changing The Power Level; Switching Off A Cooking Zone/The Cooktop - Miele KM 7404 FX Operating And Installation Instructions

Operation

Risk of fire due to overheated
food.
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.
Please note that the heating-up time
on induction cooktops is much
shorter than on conventional
cooktops.

Switching on the cooktop

 Touch the  sensor.
Further sensor controls will light up.
If no further entry is made, the
cooktop will switch itself off after a
few seconds for safety reasons.

Setting the power level

Permanent pan recognition is
activated as standard (see
"Programming"). When the cooktop is
switched on and you place a pan on a
cooking zone, the cooking zone
indicator starts to flash.
 Place a pan on the cooking zone you
want to use.
The cooking zone indicator will begin to
flash.
 Touch the appropriate sensor control
on the numerical keybank for the
power level you want.
The power level selected will flash in the
display for a few seconds and then light
up constantly.
38

Changing the power level

 Touch the relevant cooking zone
indicator.
The cooking zone indicator control will
begin to flash.
 Touch the appropriate sensor control
on the numerical keybank for the
power level you want.
Switching off a cooking zone/
the cooktop
 To switch off a cooking zone, touch
the relevant cooking zone indicator.
The cooking zone indicator control will
begin to flash.
 Touch the 0 sensor control on the
numerical keybank.
 To switch off the cooktop and all the
cooking zones, touch the  sensor.