Additional functions
Demonstration mode
This function enables the cooktop to be
demonstrated in showrooms without
heating up.
Activating/deactivating the
demonstration mode
Switch the cooktop on.
Touch and hold the 0 and 2 sensor
controls on the numerical keybank at
the same time for 6 seconds.
In the timer display, flashes
alternately with (demonstration mode
activated) or (demonstration mode
deactivated) for a few seconds.
46
Displaying cooktop data
The model designation and software
version can be displayed. There must
not be any pots or pans on the
cooktop.
Model number/Serial number
Switch the cooktop on.
Touch and hold the 0 and 4 sensor
controls on the numerical keybank at
the same time for 6 seconds.
Numbers appear in the timer display
separated by a dash.
Example: (Model number
KM 1234) – (Serial
number)
Software version
Switch the cooktop on.
Touch and hold the 0 and 3 sensor
controls on the numerical keybank at
the same time for 6 seconds.
Numbers appear in the timer display:
Example: . = Software version 1.23