Table of Contents
Advertisement
新機器使用規定
1. 新機器在最初啟用磨合期的四個星期內，請
用低於最高速度 20% 的速度運轉，之後換上
新潤滑油，才運轉至最高速度。
2. 定期之清潔保養，確保延長機器之使用壽
命。
潤滑油之注入與更換
1. 潤滑油之注入 ( 圖 13 )
(1) 將螺絲 A 旋開，以包裝箱內所附之超高速
潤滑油或選用 ESSO#32( 或 MOBIL#10)
等相當之機油加入，使油量指示桿位於油標
上下之間即可，然後再鎖緊螺絲 A。
(2) 開箱新機器或久置未使用要重新用時，請
在上勾針台等加油潤滑。
HOW TO OPERATE THE
NEW MACHINE
1. Please operate this machine in 80% of the
maximum speed in the first four weeks for
engagement. After four weeks, please do
not operate under the maximum speed until
replacing the new lubrication oil.
2. Periodically maintain and clean the machine
to ensure and extend the usage term of the
machine.
LUBRICATION AND DRAINAGE
1.Fill the lubrication oil (Fig.13)
(1)Remove the oil level inspection leng A and
fill it with the attached ultra high speed
lubricating oil, or choose ESSO#32 (or
MOBIL #10)or equivalent. Tighten the oil
level inspection leng A after the oil livel
indicator locates between the two marking
lines.
(2)Please lubricate the needle bar and
the upper looper shaft before starting
ooperating a new machine or a long idling
machine.
Upper limit
上限
下限
Lower limit
Introduction
圖 13 / Fig. 13
P16
Advertisement
Table of Contents
