Electrolux EOE7C31X User Manual page 15

1. Activate the appliance.
2. Put the point of the core temperature
sensor (with
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the top of
the cavity.
The display shows
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
4. Touch or
temperature.
5. Touch or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If
the display but does not
flash before you set the
core temperature, touch
and or
new value.
6. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
.
While the appliance calculates the
approximate duration time, the display
shows the count up time. After the first
calculation the display shows the
on the handle) into
flashing and the
to set the core
is in
to set a
approximate duration of the cooking
time.
The appliance continues to calculate the
duration during the cooking. The display
updates at intervals with the new
duration value.
When you cook with the core
temperature sensor, you can
change the temperature
shown in the display. After
you put the core temperature
sensor in the socket and set
an oven function and
temperature, the display
shows the current core
temperature.
Touch again and again to
see three other
temperatures:
• the set core
temperature
• the current oven
temperature
• the current core
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds
for two minutes and the value of the core
temperature and
appliance deactivates.
7. Touch a sensor field to deactivate the
acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
WARNING!
Be careful when you remove
the core temperature sensor.
It is hot. There is a risk of
burns.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
ENGLISH 15
flash. The