Table of Contents
Advertisement
68012002065-HW
Chapter 7 : Advanced Features
•
Press the preprogrammed Info button.
•
or to Info and press the Menu Select button directly below Info.
2
or
to Control map and press the Menu Select button directly below Sel.
The display shows the Control Map screen.
3 Perform one of the following actions:
•
or
to scroll through the various information.
•
Press the Menu Select button directly below Back to return to the previous screen.
•
Press
to return to the Home screen.
7.31.18.4
Editing the Soft ID
Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
When and where to use: This feature allows you to change your username.
Procedure:
1 Perform one of the following actions:
•
Press the preprogrammed Info button.
•
or to Info and press the Menu Select button directly below Info.
2
or
to Soft ID and press the Menu Select button directly below Sel.
The display shows the current Soft ID.
3 Perform one of the following actions:
•
Press the Menu Select button directly below Edit to edit the current Soft ID.
•
Press the Menu Select button directly below Back to return to the previous screen.
A blinking cursor appears in the Edit Soft ID screen.
4 Use the keypad to edit the text.
5 Perform one of the following actions:
•
Press the Menu Select button directly below Ok to save the new Soft ID and return to the
previous screen.
•
Press the Menu Select button directly below Cncl to return to the previous screen.
7.31.19
Front Panel Programming
You are able to customize certain feature parameters in Front Panel Programming (FPP) to enhance
the use of your radio.
The radio can be programmed in two ways:
•
Front Panel Programming (FPP) using the front panel controls of the radio.
•
Customer Programming Software (CPS), with the radio connected to a PC computer.
There are two methods to program a channel within a zone. Either:
•
Select the zone and channel through the radio interface, and then initiate the FPP feature. Or,
138
Advertisement
Table of Contents
