Subscribe to Our Youtube Channel
Related Manuals for Creative Play WICKET KEEPER TARGET PANEL T110
Summary of Contents for Creative Play WICKET KEEPER TARGET PANEL T110
- Page 1 WICKET KEEPER TARGET PANEL Installation Instructions REF: T110 - WICKET KEEPER TARGET PANEL pg 1 of 7...
- Page 2 PARTS required MEDIUM POST BATSMAN PLAYTEC PANEL STEEL FRAME COLLAR CLAMP CLA007 x 21 (M10 x 70 SOCKET BUTTON BOLTS) (M10 x 80 SOCKET BUTTON BOLTS) (GRUB SCREWS M10x8mm to be used on COLLAR CLAMPS (Covered Ends) (M10 ´NYLOC´) TOOLS required REF: T110- WICKET KEEPER TARGET PANEL pg 2 of 7...
- Page 3 Foundation Details FINISHED GROUND LEVEL SOIL MEDIUM POST CONCRETE REF: T110- WICKET KEEPER TARGET PANEL pg 3 of 7...
- Page 4 Installation Instructions Installation Instructions Attach the WICKET KEEPER PANEL to STEEL FRAME Using M10x70mm SOCKET BUTTON BOLTS / M10 NYLOCS / END CAPS Notes: SEE BELOW to ensure the correct holes are used (Some will be left ‘EMPTY’ to bolt to the COLLARS) BOLT HOLES CIRCLED Using 16 X M10x70mm SOCKET BUTTON BOLTS / 16 X M10 NYLOCS / 16 X COVERED ENDS...
- Page 5 Installation Instructions Installation Instructions Attach the ‘PANEL ASSEMBLY’ to the COLLAR CLAMPS ENSURE CORRECT FIXINGS ARE USED FOR HOLES HOLES CIRCLED will be used to attach 5 X COLLARS Using 5 X M10x70mm SOCKET BUTTON BOLTS / 5 X M10 NYLOCS / 5 X COVERED ENDS HOLE CIRCLED GREEN will be used to attach 1 X COLLAR...
- Page 6 Installation Instructions Installation Instructions Ctnd..Attach the ‘PANEL ASSEMBLY’ to the COLLAR CLAMPS REPEAT FOR OPPOSITE SIDE Tighten the GRUB screws on the COLLAR CLAMPS There are 3 x GRUB screws per COLLAR CLAMP Notes: Collar clamps are positioned as shown RIGHT (the clamp sits ‘behind ‘...
- Page 7 Additional Dimensions 0.10m 1.4m REF: T110- WICKET KEEPER TARGET PANEL pg 7 of 7...
Need help?
Do you have a question about the WICKET KEEPER TARGET PANEL T110 and is the answer not in the manual?
Questions and answers