Table of Contents
Advertisement
Software Details
4.2
Connecting to the EVM Hardware
After the Delta-Sigma ADC EvaluaTIon Software and the ADS125H02 Device Package is installed,
connect the hardware with the provided USB micro cable and connect the high-voltage supplies to J4 (if
the onboard high-voltage supply is not installed). Start the Delta-Sigma ADC EvaluaTIon Software. The
GUI automatically detects the connected hardware and displays the device register map under the Device
tab as
Figure 6
and
Figure 6. GUI View Before Connecting
4.3
Using the Software With the EVM
The
Delta-Sigma ADC EvaluaTIon Software User Manual
of how to modify device register settings, how to collect and analyze data, and control device operations
with scripts. For a list of commands that are supported on the ADS125H02 EVM, see
14
ADS125H02 Evaluation Module
Figure 7
show.
Copyright © 2018–2019, Texas Instruments Incorporated
Figure 7. GUI View After Connecting EVM
provides an overview of the GUI, an explanation
SBAU318A – October 2018 – Revised April 2019
Submit Documentation Feedback
www.ti.com
Section
4.3.4.
Advertisement
Table of Contents
