Parts Supplied - Fisher & Paykel DOUBLE DISHDRAWER DD60DA Installation Manual

Drain hose Drain hose
support (1) joiner (1)
Phillips Rubber washer
16 mm for inlet hose (1)
screws (9) (comes already
fitted)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.
Dishdrawer™ installation overview
This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be
used as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597
2

PARTS SUPPLIED

Wire clip (2)
(for securing
Drain hose joiner)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
Clamp (1)
(for securing
Drain hose joiner)
Hexagonal
DD60DA models only
socket for feet Prefinished toekick (1)
adjustment (2) and securing pins (4)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
DD60DC models only
Prefinished toekick (1)
Top
mounting
brackets (2)
OPTIONAL
3