Fisher & Paykel DOUBLE DISHDRAWER DD60DA Installation Manual page 32

two pairs of formed
brackets on either side
of the chassis
(use 16 mm screws)
2
Before refitting the
drawer, ensure the hoses
are not twisted and the
latches at the rear of 1
each drawer runner are
facing forward.
!0 B
- SECURE TO THE CABINETRY ON THE SIDES
The product has three
pairs of fixing points:
Ensure the sound insulation
is repositioned correctly.
1
!1 B
- REFIT THE DRAWER ONTO THE RUNNERS
Lift or rotate anti-clockwise the
drawer back onto the drawer runners
on either side.
2
3
Release tab
a pair of fixing
holes either side
on the bottom
(use 38 mm fixing
screws & washers)
4
Pull the release tabs forward on both
sides 100 mm. Ensure the tabs are fully
pulled forward and click into place.
11