DCS CS-364G Installation Manual page 10

CABINET PREPARATION
STEP 3:
(CONTINUED)
6) Cut the openings for the following installation:
Standard counter top installation, see Fig. 5A
Deep counter or island installation, see Fig. 5B
NOTE: If the deck is used, the sides or bottom of
the cutout may be solid combustible or
non-combustible material. If the bottom
is solid, provide a 6" x 6" cutout in the
left rear corner for the gas inlet and
power cord clearance.
Front projects outward as shown
Front projects outward as shown
from standard depth cabinet.
from standard depth cabinet.
Front flush with cabinets; a minimum of
Front flush with cabinets; a minimum
25 3/4" cabinet depth required
of 25 cabinet depth required
3/4"
Fig. 2
Counter-Sunk Screws
Counter-Sunk Screws
Fig. 3
9
Flush with cabinets Flush with cabinets