DCS CP-364GD Installation Manual page 12

UNPACKING AND HANDLING
The professional cooktop should be moved close to
I
its final location. Electric and gas connections should
be made (pgs. 15 & 16) and the backguard installed
(as required, pg. 8 & 15) before the cooktop is placed
in its final position. The grill and griddle sections are
fastened in place at the front with screws. They are
designed to be stationary and not meant to be
removed for cleaning. The griddle has two leveling
screws beneath the rear flue cover which can be used
to adjust the griddle to the desired slope. The center
screw is for shipping and should be removed. See Fig.
2.
ANCHORING THE COOKTOP
Due to the weight of the cooktop, along with a built-
I
in side frame gasket that is meant to rest and create
a seal on the counter top once installed, it is not
necessary to anchor the unit to the counter.
10
Shipping Screw
(remove)
Outer Leveling
Screws (2)
Griddle Flue Cover
Fig. 2