Chassis; Front Panel - Infortrend EonStor GSe Pro 1000 Series Hardware Manual

Chassis

The chassis is rugged constructed and divided into front and rear sections. The
chassis is designed to be installed into a rack or cabinet.

Front Panel

 Hard drive trays (1): Each drive tray is hot-swappable and holds a 2.5 / 3.5-inch
hard drive.
 Hard drive status LED (2): There is a set of hard drive status LEDs on each
hard drive tray on the right hand side to indicate operation status.
 LED Panel (3): It contains Service / Power / Cooling Fan / Thermal / System LED
 Mute button / service LED (4): The mute button is to mute an alarm when sound
or to indicate that the system requires service.
 Handles (5): There are handles on both sides of the enclosure for users to pull /
push the enclosure out and into the cabinet when the enclosure is installed on a
slide rail rackmount system.
 Rackmount holes (6): There are two rackmount holes (one on each side of the
enclosure) for users to secure the enclosure onto the cabinet.
1U model
2U model
17