System Maintenance - Infortrend EonStor GSe Pro 1000 Series Hardware Manual

System Maintenance

WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without immediate replacement, it will
disrupt the internal airflow.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
When inserting a removable module, do not use excessive force. Forcing or
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
 Controller module (please refer to
 Memory module (please refer to
 PSU module (please refer to
 Hard drive (please refer to
Replacing the Controller
Replacing Memory
Replacing the Power Supply)
Replacing the Hard Disk
48
Module)
Module(s))
Drive)