Hot-Swapping - Infortrend EonStor GSe Pro 1000 Series Hardware Manual

Hot-swapping

The system comes with a number of hot-swappable components that can be
exchanged while the system is still online without affecting the operational integrity.
These components should only be removed from the system when they have to be
replaced.
The following components can be user-maintained and hot-swappable:
 Controller module
 PSU (including cooling modules)
 Hard drive
NOTE
Normalized airflow ensures sufficient cooling of the system and is only attained when
all components are properly installed. Therefore, a failed component should only be
removed when a replacement is available. For instructions on how to replace these
hot-swappable components, please refer to System Maintenance.
26