Digital Input Test; Arc Detection Test - ABB REF 610 Operator's Manual

1MRS755539
5.5.
5.6.
Feeder Protection Relay
Operator's Manual - ANSI Version
Table 5.4.-1 Function test (Continued)
Number Function
11 Pickup of element 46
12 Trip of element 46
13 Alarm of element 49
14 Trip of element 49
15 External trip
16 Trip of element ARC
0 IRF
It is also possible to test the output contacts via serial communication
by using the O parameters.

Digital input test

This section describes how the availability of signals connected to the digital inputs
can be tested.
To monitor the status of the digital inputs, navigate in the HMI menu as follows:
1. Press an arrow button to access the main menu.
to select CONFIGURATION in the main menu and press
2. Use or
cursor is at the first menu item, FUNCTION TEST/DI. Press
the test menu.
to select DI STATUS and press
3. Use or
4. Use and to monitor the state of the other four digital inputs.
5. Press to return the display to the idle mode.
It is also possible to read the state of the digital inputs via serial
communication.

Arc detection test

This section describes how the connections for the optional external arc detection
lens sensor and connection fiber can be tested.
It is recommended that a camera flash with at least guide number 36 and adjustable
shutter speed set to at least 1/60 second is used for this test. An alternative light
source for the test is a suitable flashlight.
REF 610 REF 610
. The
again to enter
to see the status of DI1.
55