ABB REF 610 Operator's Manual page 32

REF 610 REF 610
32
Feeder Protection Relay
Operator's Manual - ANSI Version
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select the main menu group SETTINGS and the wanted
group menu (for example PROTEC. ELEMENTS), and press
3. Use or to select the parameter to be changed and press
to select setting group 1 or 2 (GRP1 or GRP2). The active setting
4. Use or
group is indicated by an asterisk "*".
5. Enter the setting mode by pressing
default password 999 is still valid, no password is required.
6. The first digit of the setting value of the parameter to be edited starts to flash.
Use and to move the cursor and
number.
7. To store a new value and return the display to the view mode, press
parameter is of a numerical kind, the display confirms the storage by flashing "-
- -" once on the display.
8. To exit the setting mode without storing the changes, press
confirming and the display returns to the view mode.
9. Press to return the display to the idle mode.
and give the password if required. If the
and to increase or decrease the
1MRS755539
.
.
. If the
once before