Ipx Sap Table - D-Link DES-6300 User Manual

Object/OID
ipxDestTable
ipxDestHopCount
1.3.6.1.4.1.171.12.6.1.1.6
ipxDestTable
ipxDestNextHopNICAddress
1.3.6.1.4.1.171.12.6.1.1.7
ipxDestTable
ipxDestNextHopNetNum
1.3.6.1.4.1.171.12.6.1.1.8
ipxDestTable
ipxDestExistState
1.3.6.1.4.1.171.12.6.1.1.9
Object/OID
ipxServTable
ipxServName
1.3.6.1.4.1.171.12.7.1.1.3
ipxServTable
ipxServNetNum
1.3.6.1.4.1.171.12.7.1.1.5
ipxServTable
ipxServNode
1.3.6.1.4.1.171.12.7.1.1.6
ipxServTable
ipxServSocket
1.3.6.1.4.1.171.12.7.1.1.7
ipxServTable
ipxServType
1.3.6.1.4.1.171.12.7.1.1.2
ipxServTable
ipxServHopCount
1.3.6.1.4.1.171.12.7.1.1.8
ipxServTable
ipxServProtocol
1.3.6.1.4.1.171.12.7.1.1.4
Description
Describes this table entry number of hops on the
route to the destination network. Entries with more
than 15 hops are removed from the table.
IPX node address (12 hexadecimal digits) of the next
IPX router in the route to the destination network,
described by this table entry. If the destination
network is one of the network segments directly
connected to this IPX router, this field is all zeroes.
Next hop IPX network number.
Defines whether the RIP interface is active. OFF is
inactive but not deleted.

IPX SAP Table

Description
Server type and server name to identify a server. The
name can include up to 47 characters.
Network portion (eight hexadecimal digits) from the
IPX server address.
Node portion 12 hexadecimal digits) from the IPX
server address.
Socket portion up to four hexadecimal digits) from the
IPX server address.
Type of service (assigned by Novell) provided by the
server.
Number of hops on the route to the server, as
determined by the IPX SAP routing algorithm.
The information source protocol.
Static—User-defined entry (SNMP)
SAP—SAP protocol.
MIB Object Reference
Field Name in NMS
Hops to Net
Forwarding Router
Address
Next Hop Net Num
Status
Field Name in NMS
Server Name
Network
Server Address
Socket
Server Type
Hops to Server
Protocol Type
5-47