D-Link DES-6300 User Manual page 49

Modular l3 ethernet switch mib command line interface (mcli)
Hide thumbs Also See for DES-6300:
Table of Contents

Advertisement

Object/OID
rip2IfConfTable
rip2IfConfStatus
1.3.6.1.2.1.23.3.1.8
Object/OID
rsIpAddrTable
rsIpAdEntAddr
1.3.6.1.4.1.171.26.1.1.1
rsIpAddrTable
rsIpAdEntIfIndex
1.3.6.1.4.1.171.26.1.1.2
Object/OID
ospfAdminStat
1.3.6.1.2.1.14.1.2
ospfRouterId
1.3.6.1.2.1.14.1.1
ospfExternLSACount
1.3.6.1.2.1.14.1.6
ospfExternLsaCksumSum
1.3.6.1.2.1.14.1.7
ipLeakRipToOspf
1.3.6.1.4.1.171.26.7.4
ipLeakStaticToOspf
1.3.6.1.4.1.171.26.7.2
ipLeakExtDirectToOspf
1.3.6.1.4.1.171.26.7.5
Description
The RIP status in the router is either valid or invalid.
IP RIP Filter
Description
The Interface IP address.
The pre-assigned Interface number.
IP OSPF II Parameters
Description
The OSPF administrative status in the router. The
field options are the following:
Enabled—The OSPF process is active on at least
one interface.
Disabled—The process is not active on any interface.
The router ID number. To ensure uniqueness the
router ID must be equal to one of the router IP
addresses. By default, the router ID takes the IP
Interface Address. Reset the device to allow changes
in the router ID to take effect.
The number of external Link-State Advertisements in
the link-state database.
The sum of LS checksums of external LS
advertisements contained in the LS database. Use
this sum to determine if there has been a change in a
router LS database, and to compare the LS database
of two routers.
Controls the route redistribution from RIP into OSPF.
When this parameter is enabled, all routes inserted
into the IP routing table via SNMP are advertised into
OSPF as external routes.
Controls route redistribution from static routes to RIP.
When this parameter is enabled, all static routes
learned via static are advertised into RIP.
Controls direct route redistribution that are external to
OSPF into OSPF. If this parameter is enabled all
external routes are advertised into OSPF as external
routes.
MIB Object Reference
Field Name in NMS
Status
Field Name in NMS
IP Address
Interface Number
Field Name in NMS
Administrative Status
Router ID
Number of External
LSAs
External LS Checksum
Sum
Leak RIP Routes
Leak Static Routes
Leak External Direct
Routes
5-23

Advertisement

Table of Contents
loading

Table of Contents