Fields; Figure 4-3: Screen Mode Display - D-Link DES-6300 User Manual

Commands
Variable Fields
Command Prompt
The screen layout is as follows:
Screen top line displays all the available commands. The upper case characters
indicate the command keys.
Screen bottom line displays the command prompt. The command prompt varies
according to the information required by the MCLI. In some cases a command is
required, and in other cases variable values are prompted.
A numbered list of the working variable fields indicating the key fields and regular

fields

If the variable is a table variable, the default value are displayed. If the variable is a
scalar variable, no values are displayed.
Fields
Up to 19 fields are listed on the screen. If the variable has more than 19 fields, the
<Up> and <Down> keys can be used to scroll though the full list. Scalar variables
display a single field. Fields are marked to indicate the type of field (see Figure 4-3):
# — Key fields
* — Mandatory fields
- — Read only fields
All field values can be modified including key fields, standard read/write fields and
standard read only fields.
Note: Changing a value on the screen does not change the value in the MIB
database. The commands add, edit and delete change values on the MIB database.
Variable Field Values

Figure 4-3: Screen Mode Display

Screen Mode
4-3