D-Link DES-6300 User Manual page 54

Modular l3 ethernet switch mib command line interface (mcli)
Hide thumbs Also See for DES-6300:
Table of Contents

Advertisement

MCLI User Guide
Object/OID
ipNetToMediaTable
ipNetToMediaPhysAddress
1.3.6.1.2.1.4.22.1.2
ipNetToMediaTable
ipNetToMediaType
1.3.6.1.2.1.4.22.1.4
No MIB associated with this
NMS field.
Object/OID
ipRedundRoutersTable
ipRedundRoutersIfAddr
1.3.6.1.4.1.171.26.6.3.1.1
ipRedundRoutersTable
ipRedundRoutersMainRouterA
ddr
1.3.6.1.4.1.171.26.6.3.1.2
ipRedundRoutersTable
ipRedundRoutersOperStatus
1.3.6.1.4.1.171.26.6.3.1.3
ipRedundRoutersTable
ipRedundRoutersPollInterval
1.3.6.1.4.1.171.26.6.3.1.4
ipRedundRoutersTable
ipRedundRoutersTimeout
1.3.6.1.4.1.171.26.6.3.1.5
Object/OID
rsDhcpServerEnable
1.3.6.1.4.1.171.38.5
rsDhcpNextServerAddress
1.3.6.1.4.1.171.38.7
5-28
Description
The station MAC address.
The entry type. Options are:
Dynamic—The entry is learned from the ARP
protocol. If the entry is not active for a predetermined
time, the node is deleted from the table.
Static—The entry is configured by the network
management station and is permanent.
In the Read From field, select from which interface to
start building the table entries displayed.
IP Redundancy
Description
The IP address that the redundancy feature is running
on.
The router IP address that the devices backing up.
The entry status:
Active—The backup router is active on this interface.
Inactive—The backup router is not active on this
interface.
This router-polling interval, in seconds. If the interval
is 0 then the router is not polled.
The interval in seconds during which the router must
signal. If the router does not signal within this interval,
it is considered non-operational. If Time Out is equal
to 0, the device ignores the table entry.
IP DHCP Parameters
Description
Enable (default) or disable the DHCP server. If
enabled, the device does not relay DHCP requests,
unless the request is from device router. If disabled,
the device relays DHCP requests to the DHCP server
configured in this window.
The DHCP server IP address. The device acts as a
DHCP relay if this parameter is not equal to 0.0.0.0.
Field Name in NMS
MAC Address
Class
Read From
Field Name in NMS
Interface IP Address
Main Router Address
Operating Status
Poll Interval
Time Out
Field Name in NMS
Server Enable
Next Server Address

Advertisement

Table of Contents
loading

Table of Contents