D-Link DES-6300 User Manual page 48

Modular l3 ethernet switch mib command line interface (mcli)
Hide thumbs Also See for DES-6300:
Table of Contents

Advertisement

MCLI User Guide
Object/OID
rsIpAddrTable
rsIpAdEntIfIndex
1.3.6.1.4.1.171.26.1.1.2
rsIpAddrTable
rsIpAdEntForwardIpBroadcast
1.3.6.1.4.1.171.26.1.1.4
rsIpAddrTable
rsIpAdEntBcastAddr
1.3.6.1.4.1.171.26.1.1.7
rsIpAddrTable
rsIpAdEntArpServer
1.3.6.1.4.1.171.26.1.1.8
Object/OID
rsRipEnable
1.3.6.1.4.1.171.26.9
ipLeakOspfToRip
1.3.6.1.4.1.171.26.7.3
ipLeakStaticToRip
1.3.6.1.4.1.171.26.7.1
Object/OID
rip2IfConfTable
rip2IfConfAddress
1.3.6.1.2.1.23.3.1.1
rip2IfConfTable
rip2IfConfSend
1.3.6.1.2.1.23.3.1.5
rip2IfConfTable
rip2IfConfReceive
1.3.6.1.2.1.23.3.1.6
5-22
Description
Interface number. If the interface is a VLAN, the
included interfaces are listed in the Interface number
box in the IP Router Interface Parameters Insert
window.
Indicates if the device forwards incoming broadcasts
to this interface.
Fills the host ID in the broadcast address with ones or
zeros.
When enabled, the system acts as an ARP requests
relay, answering ARP requests to stations on different
networks as though the device itself was the host
being addressed.
IP RIP Parameters
Description
The RIP administrative status in the router. Enabled
means the RIP process is active on at least one
interface. Disabled means the process is not active on
any interfaces.
Controls redistribution of routes from OSPF to RIP.
When this parameter is enabled, all routes learned via
OSPF are advertised into RIP.
Controls redistribution of routes from static routes to
RIP. When this parameter is enabled, all static routes
learned via static are advertised into RIP.
IP RIP Interface Parameters
Description
Current IP address interfaces.
The type of RIP being sent. Options are:
RIP Version 1—Sending RIP updates compliant with
RFC 1058.
RIP Version—Multicasting RIP2 updates.
Do Not Send—No RIP updates are sent.
The type of RIP being received. Options are:
RIP Version 1—Accepting RIP1.
RIP Version 2—Accepting RIP2.
Do Not Receive—No RIP updates are accepted.
Field Name in NMS
If Num/Interface
Number
Fwd Broadcast
Broadcast Type
ARP Server
Field Name in NMS
Administrative Status
Leak OSPF Routes
Leak Static Routes
Field Name in NMS
IP Address
Outgoing RIP
Incoming RIP

Advertisement

Table of Contents
loading

Table of Contents