D-Link DES-6300 User Manual page 35

Object/OID
dot3adAggActorSystemPriority
1.2.840.802.10006.300.43.1.1.1.1.3
dot3adAggActorSystemID
1.2.840.802.10006.300.43.1.1.1.1.4
dot3adAggAggregateOrIndividual
1.2.840.802.10006.300.43.1.1.1.1.5
dot3adAggActorAdminKey
1.2.840.802.10006.300.43.1.1.1.1.6
dot3adAggActorOperKey
1.2.840.802.10006.300.43.1.1.1.1.7
dot3adAggPartnerSystemID
1.2.840.802.10006.300.43.1.1.1.1.8
dot3adAggPartnerSystemPriority
1.2.840.802.10006.300.43.1.1.1.1.9
dot3adAggPartnerOperKey
1.2.840.802.10006.300.43.1.1.1.1.10
dot3adAggCollectorMaxDelay
1.2.840.802.10006.300.43.1.1.1.1.11
dot3adAggPortListEntry
1.2.840.802.10006.300.43.1.1.2.1
dot3adAggPortEntry
1.2.840.802.10006.300.43.1.2.1.1
Description
A 2-octet read-write value indicating the priority
value associated with the Actor's System ID.
A 6-octet read-write MAC address value used
as a unique identifier for the System that
contains this Aggregator.
A read-only Boolean value indicating whether
the Aggregator represents an Aggregate
('TRUE') or an Individual link ('FALSE').
The current administrative value of the Key for
the Aggregator. The administrative Key value
may differ from the operational Key value for
the reasons discussed in 43.6.2. This is a 16-
bit, read-write value. The meaning of particular
Key values is of local significance.
The current operational value of the Key for the
Aggregator. The administrative Key value may
differ from the operational Key value for the
reasons discussed in 43.6.2. This is a 16-bit,
read-only value. The meaning of particular Key
values is of local significance.
A 6-octet read-only MAC address value
consisting of the unique identifier for the
current protocol Partner of this Aggregator. A
value of zero indicates that there is no known
Partner. If the aggregation is manually
configured, this System ID value will be a value
assigned by the local System.
A 2-octet read-only value that indicates the
priority value associated with the Partner's
System ID. If the aggregation is manually
configured, this System Priority value will be a
value assigned by the local System.
The current operational value of the Key for the
Aggregator's current protocol Partner. This is a
16-bit, read-only value. If the aggregation is
manually configured, this Key value will be a
value assigned by the local System.
The value of this 16-bit read-write attribute
defines the maximum delay, in tens of
microseconds, that may be imposed by the
Frame Collector between receiving a frame
from an Aggregator Parser, and either
delivering the frame to its MAC MCLIent or
discarding the frame (see 43.2.3.1.1).
A list of the ports associated with a given
Aggregator. This is indexed by the ifIndex of
the Aggregator.
A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this
device.
MIB Object Reference
Field Name in NMS
5-9