Replacing The Lens - D-Link Securicam Network DCS-2000 Manual

Replacing the Lens

Since the DCS-2000 is designed with a CS- mount, the lens equipped with the
Internet Camera can be replaced with any standard C or CS lens commonly
used within the surveillance industry.
Follow the instructions below to replace the supplied lens with any C or CS type
lens.
1. Unscrew the Internet Camera lens
2. When using a C-lens, attach the new lens to a CS-C adapter
3. Screw the new lens onto the Internet Camera. If appropriate, adjust the iris
according to the prevailing light conditions.
4. Refer to Adjusting the Internet Camera Focus on the previous page.
5. Refresh the Web browser and monitor the results from the Internet Camera.
The Internet Camera is designed for indoor usage and if your
application requires prolonged exposure to sunlight, a sun visor is
recommended to protect the Internet Camera.
Warning!
Warning!
Direct exposure to sunlight may cause permanent
damage to the CMOS sensor. When operation is re-
quired in glaring light environment, it is recommended
that an iris lens be used.
131