D-Link Securicam Network DCS-2000 Manual page 77

Using IP surveillance Software (continued)
Monitor Program (continued)
Alert Settings:
Specific alert actions can be performed by setting the options in this window.
Enable motion detect
This will trigger an alert sound that has been specified in the
section titled "Global Settings \ Alert Sound." Check this option to
enable audio alert for the camera selected.
Enable digital input
This function is similar to "Enable Motion Detect" mentioned
above. Once this option has been checked, a digital input device
will be able to trigger an alert sound and recording.
Digital input alert
This application software provides options for you to define the
triggering criteria for the digital input of the DCS-2000. The alert
of the digital input can be defined as high-level triggered or low-
level triggered.
Recording Settings:
Record # secs. before event
Once the automatic video recording has been activated, you can
change this setting to regulate the recording of triggered events.
Recording will start from the specified number of seconds before
the alert event has been invoked.
Record # secs. after event
Recording will last for the specified number of seconds after the
alert event has been invoked.
Media Type
You can specify which media type you want to record: Video,
Audio, or both.
77