D-Link Securicam Network DCS-2000 Manual page 87

Using IP surveillance Software (continued)
Monitor Program (continued)
Press and hold the left
mouse button here.
Move the mouse cursor
here, and then release
the left mouse button.
The Layout
There are six different layouts available, as shown below, for the display
windows in the monitor program. You can select one of them by clicking on
a layout icon. In each layout, you can drag and drop the "channel number" to
any display window in the video area. Following the procedures described
in the section titled "Show the video of a specified channel", you can add
the video channels to display windows within the selected layout one by
one. You can also exchange the video between different display windows
by dragging and dropping.
4 camera layout
1 camera layout
9 camera layout
87
6 camera layout
16 camera layout
13 camera layout